R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

177
undo port interface-list
Default
All ports are in VLAN 1.
Views
VLAN view
Predefined user roles
network-admin
mdc-admin
Parameters
interface-list: Specifies an interface list, in the format of interface-list = { interface-type interface-number
[ to interface-type interface-number ] }&<1-10>, where interface-type interface-number represents the
interface type and interface number, and &<1-10> indicates that you can specify up to 10 interface-type
interface-number [ to interface-type interface-number ] parameters.
Usage guidelines
This command is applicable only on access ports.
By default, all ports are access ports. However, you can manually configure the port type. For more
information, see "port link-type."
Examples
# Assign Ten-GigabitEthernet 1/0/1 through Ten-GigabitEthernet 1/0/3 to VLAN 2.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2] port ten-gigabitethernet 1/0/1 to ten-gigabitethernet 1/0/3
Related commands
display vlan
port access vlan
Use port access vlan to assign the access ports to the specified VLAN.
Use undo port access vlan to restore the default.
Syntax
port access vlan vlan-id
undo port access vlan
Default
All access ports belong to VLAN 1.
Views
Layer 2 Ethernet interface view, Layer 2 aggregate interface view, S-channel interface view, S-channel
aggregate interface view
Predefined user roles
network-admin