R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

187
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] port private-vlan host
[Sysname-Ten-GigabitEthernet1/0/1] display this
#
interface Ten-GigabitEthernet1/0/1
port link-mode bridge
port private-vlan host
#
return
[Sysname-Ten-GigabitEthernet1/0/1] port access vlan 20
[Sysname-Ten-GigabitEthernet1/0/1] display this
#
interface Ten-GigabitEthernet1/0/1
port link-mode bridge
port private-vlan host
port link-type hybrid
undo port hybrid vlan 1
port hybrid vlan 2 20 untagged
port hybrid pvid vlan 20
#
return
Related commands
• private-vlan
• private-vlan primary
• port private-vlan promiscuous
• port private-vlan trunk promiscuous
port private-vlan promiscuous
Use port private-vlan vlan-id promiscuous to configure the port to operate in promiscuous mode in the
specified VLAN and assign the port to the specified VLAN. If the specified VLAN is a primary VLAN that
has been associated with secondary VLANs, the command also assigns the port to the associated
secondary VLANs.
Use undo port private-vlan to restore the default. The command does not change the VLAN attributes
(the allowed secondary VLANs, link type, and PVID) of the port.
Syntax
port private-vlan vlan-id promiscuous
undo port private-vlan
Default
A port does not operate in promiscuous mode in a VLAN.
Views
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
Predefined user roles
network-admin