R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

195
[Sysname-Ten-GigabitEthernet1/0/1] quit
[Sysname] interface ten-gigabitethernet 1/0/3
[Sysname-Ten-GigabitEthernet1/0/3] qinq enable
[Sysname-Ten-GigabitEthernet1/0/3] display qinq
Interface
Ten-GigabitEthernet1/0/1
Ten-GigabitEthernet1/0/3
Table 42 Command output
Field Descri
p
tion
Interface Interface name.
Ten-GigabitEthernet1/0/1 QinQ-enabled interface.
Related commands
qinq enable
qinq enable
Use qinq enable to enable QinQ on an interface.
Use undo qinq enable to restore the default.
Syntax
qinq enable
undo qinq enable
Default
QinQ is disabled on all interfaces.
Views
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
Predefined user roles
network-admin
mdc-admin
Examples
# Enable QinQ on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] qinq enable
Related commands
display qinq
qinq ethernet-type customer-tag
Use qinq ethernet-type customer-tag to configure the CVLAN TPID.