R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

202
LLDP commands
You can set an Ethernet port as a Layer 3 interface by using the port link-mode route command (see
"Configuring Ethernet interfaces").
display lldp local-information
Use display lldp local-information to display local LLDP information, which will be contained in the
advertisable LLDP TLVs and sent to neighboring devices.
Syntax
display lldp local-information [ global | interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
global: Displays the global local LLDP information.
interface interface-type interface-number: Displays the local LLDP information on the interface specified
by its type and number.
Usage guidelines
If no keyword or argument is specified, this command displays all local LLDP information, including the
global LLDP information and the LLDP information about the LLDP-enabled ports in the up state.
Examples
# Display all local LLDP information. (Suppose that DCBX is IEEE Std 802.1Qaz™-2011. )
<Sysname> display lldp local-information
Global LLDP local-information:
Chassis ID : 000c-1000-1111
System name : HP
System description : HP Comware Platform Software, Software Version 7.1.045,
Feature 2110L06
HP 11908-V
Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.
System capabilities supported : Bridge, Router, Customer Bridge, Service Bridge
System capabilities enabled : Bridge, Router, Customer Bridge
MED information:
Device class : Connectivity device