R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

206
Field Descri
p
tion
Management address OID Management address object ID.
DCBX control info Displayed as version information in IEEE Std 802.1Qaz™-2011.
Oper version DCBX version number.
Sequence number Number of DCBX TLV content changes.
Acknowledge number Times of synchronizing configurations by the peer device.
DCBX ETS info CoS-to-local priority mapping and bandwidth allocation.
Percentage Percentage of bandwidth allocated.
P0- P1- P2- P3- P4- P5- P6-
P7-
Number of supported priorities configured by using the
priority-flow-control no-drop dot1p dot1p-list command at the local end.
Number of traffic classes
supported
Capability set supported by PFC (displayed only in Rev 1.01).
Priority 802.1p priority.
Protocol ID Application protocol number.
CoS map Application protocol-to-CoS mapping.
CBS
Indicates whether the token bucket mechanism is supported on the port:
•
False—The token bucket mechanism is not supported.
• True—The token bucket mechanism is supported.
Max TCs Maximum number of priorities supported.
TSA Transmission selection algorithm.
Value of MBC
MBC indicates the ability of packets to bypass MACsec. It is 1-bit long.
• 0—Packets can bypass MACsec when MACsec is disabled.
• 1—Packets cannot bypass MACsec when MACsec is disabled.
Auto-negotiation supported Indicates whether auto-negotiation is supported on the port.
Auto-negotiation enabled Indicates whether auto-negotiation is enabled on the port.
OperMau Speed and duplex state of the port.
Power port class
PoE device type:
• PSE—Power sourcing equipment.
• PD—Powered device.
PSE power supported Indicates whether the device can operate as a PSE.
PSE power enabled Indicates whether the device is operating as a PSE.
PSE pairs control ability Indicates whether the PSE-PD pair control is available.
Power pairs
PoE mode:
• Signal—PoE over signal lines.
• Spare—PoE over spare lines.