R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

216
Field Descri
p
tion
System capabilities supported
Capabilities supported on the neighboring device:
• Repeater—Signal repeating is supported.
• Bridge—Switching is supported.
• WlanAccessPoint—The neighboring device can serve as a
wireless access point.
• Router—Routing is supported.
• Telephone—The neighboring device can serve as a telephone.
• DocsisCableDevice—The neighboring device can serve as a
DOCSIS-compliant cable device.
• StationOnly—The neighboring device can serve as a station only.
• Customer Bridge—The customer bridge function is enabled.
• Service Bridge—The service bridge function is enabled.
• TPMR—The TPMR function is enabled.
• Other—Functions other than those listed above are supported.
System capabilities enabled
Capabilities enabled on the neighboring device:
• Repeater—Signal repeating is enabled.
• Bridge—Switching is enabled.
• WlanAccessPoint—The neighboring device is serving as a
wireless access point.
• Router—Routing is enabled.
• Telephone—The neighboring device is serving as a telephone.
• DocsisCableDevice—The neighboring device is serving as a
DOCSIS-compliant cable device.
• StationOnly—The neighboring device is serving as a station only.
• Customer Bridge—The customer bridge function is enabled.
• Service Bridge—The service bridge function is enabled.
• TPMR—The TPMR function is enabled.
• Other—Functions other than those listed above are supported.
Management address OID Management address object ID.
DCBX control info Displayed as version information in IEEE Std 802.1Qaz™-2011.
Oper version DCBX version number.
Sequence number Number of DCBX TLV content changes.
Acknowledge number Times of synchronizing configurations by the peer device.
DCBX ETS info CoS-to-local priority mapping and bandwidth allocation.
Percentage Percentage of bandwidth allocated.
P0- P1- P2- P3- P4- P5- P6- P7-
Number of supported priorities configured by using the
priority-flow-control no-drop dot1p dot1p-list command on the
neighbor.
Number of traffic classes supported
Capability set supported by PFC (displayed only in Rev 1.01 and
IEEE Std 802.1Qaz™-2011).
CoS map Application protocol-to-CoS mapping.