R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

234
Predefined user roles
network-admin
mdc-admin
Parameters
value: Sets the TTL multiplier in the range of 2 to 10.
Usage guidelines
The TTL TLV carried in an LLDPDU determines how long the device information carried in the LLDPDU can
be saved on a recipient device.
By setting the TTL multiplier, you can configure the TTL of locally sent LLDPDUs, which determines how
long information about the local device can be saved on a neighboring device. The TTL is expressed by
using the following formula:
TTL = Min (65535, (TTL multiplier × LLDPDU transmit interval))
As the expression shows, the TTL can be up to 65535 seconds.
Examples
# Set the TTL multiplier to 6.
<Sysname> system-view
[Sysname] lldp hold-multiplier 6
Related commands
lldp timer tx-interval
lldp management-address-format string
Use lldp management-address-format string to configure the encoding format of the management
address as character string.
Use undo lldp management-address-format to restore the default.
Syntax
In Layer 2 or Layer 3 Ethernet interface view:
lldp [ agent { nearest-customer | nearest-nontpmr } ] management-address-format string
undo lldp [ agent { nearest-customer | nearest-nontpmr } ] management-address-format
In Layer 2 aggregate interface view:
lldp agent { nearest-customer | nearest-nontpmr } management-address-format string
undo lldp agent { nearest-customer | nearest-nontpmr } management-address-format
Default
The value in the management address TLV is numeric type.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view, Layer 2 aggregate interface view
Predefined user roles
network-admin
mdc-admin