R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

235
Parameters
agent: Specifies an LLDP agent type. If no agent type is specified in Ethernet interface view, the command
configures the encoding format of the management address for nearest bridge agents.
nearest-bridge: Specifies nearest bridge agents.
nearest-customer: Specifies nearest customer bridge agents.
nearest-nontpmr: Specifies nearest non-TPMR bridge agents.
Usage guidelines
LLDP neighbors must use the same data type for the value field in the management address TLV.
Examples
# Configure the encoding format of the management address as character string for the nearest customer
bridge agents on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] lldp agent nearest-customer
management-address-format string
lldp max-credit
Use lldp max-credit to set the token bucket size for sending LLDPDUs.
Use undo lldp max-credit to restore the default.
Syntax
lldp max-credit credit-value
undo lldp max-credit
Default
The token bucket size for sending LLDPDUs is 5.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
credit-value: Specifies the token bucket size for sending LLDPDUs, in the range of 1 to 100.
Examples
# Set the token bucket size for sending LLDPDUs to 10.
<Sysname> system-view
[Sysname] lldp max-credit 10
lldp mode
Use lldp mode to configure LLDP to operate in service bridge mode.