R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

240
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
interval: Sets the LLDPDU transmit interval in the range of 5 to 32768 seconds.
Examples
# Set the LLDPDU transmit interval to 20 seconds.
<Sysname> system-view
[Sysname] lldp timer tx-interval 20
lldp tlv-enable
Use lldp tlv-enable to configure the types of advertisable TLVs.
Use undo lldp tlv-enable to disable the advertising of specific types of TLVs.
Syntax
In Layer 2 Ethernet interface view:
• For nearest bridge agents:
lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description |
system-name | management-address-tlv [ ip-address ] } | dot1-tlv { all | port-vlan-id |
link-aggregation | dcbx | protocol-vlan-id [ vlan-id ] | vlan-name [ vlan-id ] | management-vid
[ mvlan-id ] } | dot3-tlv { all | mac-physic | max-frame-size | power } | med-tlv { all | capability
| inventory | network-policy | power-over-ethernet | location-id { civic-address device-type
country-code { ca-type ca-value }&<1-10> | elin-address tel-number } } }
undo lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description |
system-name | management-address-tlv } | dot1-tlv { all | port-vlan-id | link-aggregation | dcbx
| protocol-vla
n-id | vlan-name | management-vid } | dot3-tlv { all | mac-physic |
max-frame-size | power } | med-tlv { all | capability | inventory | network-policy |
power-over-ethernet | location-id } }
• For nearest non-TPMR bridge agents:
lldp agent nearest-nontpmr tlv-enable { basic-tlv { all | port-description | system-capability |
system-description | system-name | management-address-tlv [ ip-address ] } | dot1-tlv { all | evb
| port-vlan-id | link-aggregation } }
undo lldp agent nearest-nontpmr tlv-enable { basic-tlv { all | port-description | system-capability
| system-description | system-name | management-address-tlv } | dot1-tlv { all | evb |
port-vlan-id | link-aggregation } }
• For nearest customer bridge agents:
lldp agent nearest-customer tlv-enable { basic-tlv { all | port-descrip
tion | system-capability |
system-description | system-name | management-address-tlv [ ip-address ] } | dot1-tlv { all |
port-vlan-id | link-aggregation } }