R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

241
undo lldp agent nearest-customer tlv-enable { basic-tlv { all | port-description | system-capability
| system-description | system-name | management-address-tlv } | dot1-tlv { all | port-vlan-id |
link-aggregation } }
In Layer 3 Ethernet interface view:
• lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description |
system-name | management-address-tlv [ ip-address ] } | dot1-tlv { all | link-aggregation } |
dot3-tlv { all | mac-physic | max-frame-size | power } | med-tlv { all | capability | inventory |
power-over-ethernet | location-id { civic-address device-type country-code { ca-type
ca-value }&<1-10> | elin-address tel-number } } }
• lldp agent { nearest-nontpmr | nearest-customer } tlv-enable { basic-tlv { all | port-description |
system-capability | sy
stem-description | system-name | management-address-tlv [ ip-address ] }
| dot1-tlv { all | link-aggregation } }
• undo lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description |
system-name | management-address-tlv } | dot1-tlv { all | link-aggregation } | dot3-tlv { all |
mac-physic | max-frame-size | power } | med-tlv { all | capability | inventory |
power-over-ethernet | location-id } }
• undo lldp agent { nearest-nontpmr | nearest-customer } tlv-enable { basic-tlv { all |
port-description | system-capability | system-description | system-name |
management-address-tlv } | dot1-tlv { all | link-aggregation } }
In Layer 2 aggregate interface view:
• lldp agent nearest-nontpmr tlv-enable { basic-tlv { all | manag
ement-address-tlv [ ip-address ] |
port-description | system-capability | system-description | system-name } | dot1-tlv { all | evb |
port-vlan-id } }
• lldp agent nearest-customer tlv-enable { basic-tlv { all | management-address-tlv [ ip-address ] |
port-description | system-capability | system-description | system-name } | dot1-tlv { all |
port-vlan-id } }
• lldp tlv-enable dot1-tlv { protocol-vlan-id [ vlan-id ] | vlan-name [ vlan-id ] | management-vid
[ mvlan-id ] }
• undo lldp agent nearest-nontpmr tlv-enable { basic-tlv { all | management-address-tlv |
port-description | system-capability | system-description | system-name } | dot1-tlv { all | evb |
port-vlan-id } }
• undo lldp agent nearest-customer tlv-enable { basic-tlv { all | management-address-tlv |
port-description | s
ystem-capability | system-description | system-name } | dot1-tlv { all |
port-vlan-id } }
• undo lldp tlv-enable dot1-tlv { protocol-vlan-id | vlan-name | management-vid }
Default
On Layer 2 Ethernet interfaces:
• Nearest bridge agents can advertise all types of LLDP TLVs except the DCBX TLV, location
identification TLV, port and protocol VLAN ID TLVs, VLAN name TLVs, and management VLAN ID
TLVs.
• Nearest non-TPMR bridge agents can advertise only the EVB TLV.
• Nearest customer bridge agents can advertise basic TLVs and IEEE 802.1 organizationally specific
TLVs.
On Layer 3 Ethernet interfaces: