R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

242
• Nearest bridge agents can advertise all types of LLDP TLVs (only link aggregation TLV in 802.1
organizationally specific TLVs) except network policy TLVs.
• Nearest non-TPMR bridge agents advertise no TLVs.
• Nearest customer bridge agents can advertise basic TLVs and IEEE 802.1 organizationally specific
TLVs (only link aggregation TLV).
On Layer 2 aggregate interfaces:
• Nearest non-TPMR bridge agents can advertise only EVB TLVs.
• Nearest customer bridge agents can advertise basic TLVs and IEEE 802.1 organizationally specific
TLVs (only port and protocol VLAN ID TLV, VLAN name TLV, and management VLAN ID TLV).
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view, Layer 2 aggregate interface view
Predefined user roles
network-admin
mdc-admin
Parameters
agent: Specifies an LLDP agent type. If no agent type is specified in Ethernet interface view, the command
configures the types of advertisable TLVs for nearest bridge agents.
nearest-customer: Specifies nearest customer bridge agents.
nearest-nontpmr: Specifies nearest non-TPMR bridge agents.
all: Advertises all TLVs of a specific type.
• Enables the interface to advertise all basic LLDP TLVs, IEEE 802.1 organizationally specific LLDP TLVs,
or IEEE 802.3 organizationally specific LLDP TLVs if the all keyword is specified for basic-tlv, dot1-tlv,
or dot3-tlv.
• Enables the interface to advertise all LLDP-MED TLVs except location identification TLVs if the all
keyword is specified for med-tlv.
basic-tlv: Advertises basic LLDP TLVs.
management-address-tlv [ ip-address ]: Advertises management address TLVs. ip-address specifies the
management address to be advertised. By default:
• For a Layer 2 Ethernet or aggregate interface, the management address is the main IP address of
the VLAN interface that is in up state and whose corresponding VLAN ID is the lowest among the
VLANs permitted on the port. If none of the VLAN interfaces of the permitted VLANs is assigned an
IP address or all VLAN interfaces are down, the MAC address of the port will be advertised.
• For a Layer 3 Ethernet interface, the management address is its own IP address. If no IP address is
configured for the Layer 3 Ethernet interface, the MAC address of the port will be advertised.
port-description: Advertises port description TLVs.
system-capability: Advertises system capabilities TLVs.
system-description: Advertises system description TLVs.
system-name: Advertises system name TLVs.
dot1-tlv: Advertises IEEE 802.1 organizationally specific LLDP TLVs.
dcbx: Advertises the Data Center Bridging Exchange Protocol (DCBX) TLV.