R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

244
If the MAC/PHY configuration/status TLV is not advertisable, none of the LLDP-MED TLVs will be
advertised regardless of whether they are advertisable. If the LLDP-MED capabilities TLV is not
advertisable, the other LLDP-MED TLVs will not be advertised regardless of whether they are advertisable.
The port and protocol VLAN ID TLV, VLAN name TLV, and management VLAN ID TLV in IEEE 802.1
organizationally specific LLDP TLVs can be configured only for nearest bridge agents. The configuration
can be inherited by nearest customer bridge agents and nearest non-TPMR bridge agents.
Examples
# Enable the device to advertise link aggregation TLVs of the IEEE 802.1 organizationally specific TLVs for
the nearest customer bridge agents on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] lldp agent nearest-customer tlv-enable dot1-tlv
link-aggregation