R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

245
Service loopback group commands
display service-loopback group
Use display service-loopback group to display information about service loopback groups.
Syntax
display service-loopback group [ number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
number: Specifies a service loopback group ID in the range of 1 to 1024. If you do not specify a service
loopback group, this command displays information about all service loopback groups.
Examples
# Display information about service loopback group 5.
<Sysname> display service-loopback group 5
Service Group ID: 5 Service Type: Tunnel
Member:
Ten-GigabitEthernet1/0/1
Ten-GigabitEthernet1/0/2
Table 50 Command output
Field Descri
p
tion
Service Group ID Service loopback group ID.
Service Type
Service type of the service loopback group.
The service type can only be unicast tunnel traffic.
Member Member ports of the service loopback group.
port service-loopback group
Use port service-loopback group to assign a port to a service loopback group.
Use undo port service-loopback group to remove a port from a service loopback group.