R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

246
Syntax
port service-loopback group number
undo port service-loopback group
Default
The service loopback group does not contain ports.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
mdc-admin
Parameters
number: Specifies a service loopback group ID in the range of 1 to 1024.
Usage guidelines
Before assigning a port to a service loopback group, make sure the port supports the service type of the
group.
You can assign up to 32 ports to the service loopback group.
When you assign a port to the service loopback group, the system removes the configuration on the port.
For correct traffic processing, make sure the service loopback group has at least one member port when
it is being used by a feature.
Examples
# Assign Ten-GigabitEthernet1/0/1 to service loopback group 5.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] port service-loopback group 5
service-loopback group
Use service-loopback group to create a service loopback group and specify its service type.
Use undo service-loopback group to delete a service loopback group.
Syntax
service-loopback group number type tunnel
undo service-loopback group number
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
number: Specifies a service loopback group ID in the range of 1 to 1024.