R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

23
Use undo flow-interval to restore the default interval.
Syntax
flow-interval interval
undo flow-interval
Default
The interface statistics polling interval is 300 seconds.
Views
Ethernet interface view
Predefined user roles
network-admin
mdc-admin
Parameters
interval: Sets the statistics polling interval, in seconds. The interval is in the range of 5 to 300 and must
be a multiple of 5.
Examples
# Set the statistics polling interval to 100 seconds on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] flow-interval 100
interface
Use interface to enter interface view.
Syntax
interface interface-type interface-number
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
interface-type: Specifies an interface type.
interface-number: Specifies an interface number.
Examples
# Enter Ten-GigabitEthernet 1/0/1 interface view.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1]