R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

31
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
interface-type: Specifies an interface type.
interface-number: Specifies an interface number.
Usage guidelines
Before collecting traffic statistics for a specific period of time on an interface, clear the old statistics first.
If no interface type is specified, this command clears statistics for all interfaces.
If only the interface type is specified, this command clears statistics for all interfaces of that type.
If both the interface type and the interface number are specified, this command clears statistics for the
specified interface.
Examples
# Clear the statistics of Ten-GigabitEthernet 1/0/1.
<Sysname> reset counters interface ten-gigabitethernet 1/0/1
Related commands
• display interface
• display counters interface
• display counters rate interface
reset ethernet statistics
Use reset ethernet statistics to clear the Ethernet statistics.
Syntax
In standalone mode:
reset ethernet statistics slot slot-number
In IRF mode:
reset ethernet statistics chassis chassis-number slot slot-number
Views
User view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator