R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

61
Bulk interface configuration commands
display interface range
Use display interface range to display information about interface ranges configured through the
interface range name command.
Syntax
display interface range [ name name ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
name name: Specifies an interface range by its name, a case-sensitive string of 1 to 32 characters. If you
do not specify an interface range name, this command displays information about all existing interface
ranges.
Examples
# Display information about all existing interface ranges configured through the interface range name
command.
<Sysname> display interface range
Interface range name t2 Ten-GigabitEthernet1/0/1 Ten-GigabitEthernet1/0/2
Interface range name test Ten-GigabitEthernet1/0/11 Ten-GigabitEthernet1/0/12
The output shows that interfaces Ten-GigabitEthernet 1/0/1 and Ten-GigabitEthernet 1/0/2 are added
to interface range named t2, and interfaces Ten-GigabitEthernet 1/0/11 and Ten-GigabitEthernet
1/0/12 are added to interface range named test.
Related commands
interface range name
interface range
Use interface range to create an interface range and enter the interface range view.
Syntax
interface range interface-list
Views
System view