R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

64
• The maximum number of interface range names is only limited by the system resources. To
guarantee bulk interface configuration performance, HP recommends configuring fewer than 1000
interface range names.
Examples
# Add Ten-GigabitEthernet 1/0/1 through Ten-GigabitEthernet 1/0/12 to interface range named
myEthPort, and enter the interface range view.
<Sysname> system-view
[Sysname] interface range name myEthPort interface ten-gigabitethernet 1/0/1 to
ten-gigabitethernet 1/0/12
[Sysname-if-range-myEthPort]
# Enter the view of interface range named myEthPort.
<Sysname> system-view
[Sysname] interface range name myEthPort
[Sysname-if-range-myEthPort]
Related commands
display interface range