R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

66
This command displays dynamic MAC address entries for an aggregate interface only when the
aggregate interface has at least one Selected member port.
Examples
# Display MAC address entries for VLAN 100.
<Sysname> display mac-address vlan 100
MAC Address VLAN ID State Port/NickName Aging
0001-0101-0101 100 Multiport XGE1/0/1 N
XGE1/0/2
0033-0033-0033 100 Blackhole N/A N
0000-0000-0002 100 Static XGE1/0/3 N
00e0-fc00-5829 100 Learned XGE1/0/4 Y
# Display the total number of MAC address entries.
<Sysname> display mac-address count
1 mac address(es) found.
Table 17 Command output
Field Description
VLAN ID
ID of the VLAN to which the outgoing interface of the MAC address entry
belongs.
State
MAC address entry state:
• Static—Static MAC address entry.
• Learned—Dynamic MAC address entry. Dynamic entries can be manually
configured, or learned.
• Blackhole—Blackhole MAC address entry.
• Multiport—Multiport unicast MAC address entry.
Port/NickName
When the field displays an interface name, the field indicates the outgoing
interface for packets that are destined for the MAC address. This field displays
N/A for a blackhole MAC address entry.
When the field displays a 16-bit number in hexadecimal format (for example,
0x12ab), the field indicates the RB through which the packets destined for the
MAC address leaves the TRILL network. For information about RB and the TRILL
network, see TRILL Configuration Guide.
Aging
Aging time:
• Y—The entry is aging.
• N—The entry does not age.
mac address(es) found Number of matching MAC address entries.
Related commands
• mac-address
• mac-address timer
display mac-address aging-time
Use display mac-address aging-time to display the aging timer for dynamic MAC address entries.