R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

83
Ethernet link aggregation commands
bandwidth
Use bandwidth to configure the expected bandwidth for an interface.
Use undo bandwidth to restore the default.
Syntax
bandwidth bandwidth-value
undo bandwidth
Default
The expected bandwidth (in kbps) is the interface baud rate divided by 1000.
Views
Layer 2 aggregate interface view
Predefined user roles
network-admin
mdc-admin
Parameters
bandwidth-value: Specifies the expected bandwidth in the range of 1 to 400000000 kbps.
Usage guidelines
The expected bandwidth of an interface affects the following items:
• Bandwidth assignment with CBQ. For more information, see ACL and QoS Configuration Guide.
• Link costs in OSPF, OSPFv3, and IS-IS. For more information, see Layer 3—IP Routing Configuration
Guide.
Examples
# Set the expected bandwidth for Layer 2 aggregate interface 1 to 10000 kbps.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] bandwidth 10000
default
Use default to restore the default settings for an aggregate interface.
Syntax
default
Views
Layer 2 aggregate interface view