R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

85
display interface
Use display interface to display aggregate interface information.
Syntax
display interface [ bridge-aggregation ] [ brief [ down | description ] ]
display interface bridge-aggregation interface-number [ brief [ description ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
bridge-aggregation: Displays information about Layer 2 aggregate interfaces.
interface-number: Specifies an existing aggregate interface number. The value range for the
interface-number argument is the set of all existing aggregate interface numbers.
brief: Displays brief interface information. If you do not specify this keyword, this command displays
detailed interface information.
down: Displays information about interfaces in the down state and the causes for the down state. If you
do not specify this keyword, this command displays information about interfaces in all states.
description: Displays complete interface descriptions. If you do not specify this keyword, the command
displays only the first 27 characters of interface descriptions.
Usage guidelines
If the bridge-aggregation keyword is not specified, this command displays information about all
interfaces.
If the bridge-aggregation keyword is specified without any interface number specified, this command
displays information about all Layer 2 aggregate interfaces.
If the bridge-aggregation interface-number option is specified, this command displays information about
the specified Layer 2 aggregate interface.
Examples
# Display detailed information about Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> display interface bridge-aggregation 1
Bridge-Aggregation1
Current state: UP
IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 000f-e207-f2e0
Description: Bridge-Aggregation1 Interface
Bandwidth: 0kbps
Unknown-speed mode, unknown-duplex mode
Link speed type is autonegotiation, link duplex type is autonegotiation
PVID: 1