R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

87
Field Descri
p
tion
Port link-type Port link type: access, trunk, or hybrid.
Tagged Vlan
Packets from the specified VLANs are sent out of this
interface with a VLAN tag:
• Tagged Vlan: none—All packets are sent out of
this interface without a VLAN tag.
• Tagged Vlan: 1—Packets from VLAN 1 are sent out
of this interface with a VLAN tag.
This field is displayed when the port link type is access
or hybrid.
Untagged Vlan
Packets from the specified VLANs are sent out of this
interface without a VLAN tag:
• Untagged Vlan: none—All packets are sent out of
this interface with a VLAN tag.
• Untagged Vlan: 1—Packets from VLAN 1 are sent
out of this interface without a VLAN tag.
This field is displayed when the port link type is access
or hybrid.
Last clearing of counters
Time when the reset counters interface command was
last used to clear the interface statistics.
Never indicates the reset counters interface command
has never been used on the interface since the
device's startup.
Last 300 seconds input/output rate Average input/output rate over the last 300 seconds.
Input/Output (total) Statistics of all packets received/sent on the interface.
Input/Output (normal)
Statistics of all normal packets received/sent on the
interface.
Line protocol state Link layer state of the interface.
Internet protocol processing
IP packet processing.
Disabled indicates that IP packets cannot be
processed.
For an interface configured with an IP address, this
field changes to Internet Address is.
Brief information on interface(s) under bridge mode Brief information about Layer 2 interfaces.
Link: ADM - administratively down; Stby - standby
Link status:
• ADM—The interface has been administratively
shut down. To recover its physical layer state, run
the undo shutdown command.
• Stby—The interface is operating as a backup
interface.