R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

88
Field Descri
p
tion
Speed or Duplex: (a)/A - auto; H - half; F - full
If the speed of an interface is automatically
negotiated, its speed attribute includes the auto
negotiation flag, indicated by the letter a in
parentheses.
If the duplex mode of an interface is automatically
negotiated, its duplex mode attribute includes the auto
negotiation flag, indicated by the letter a in
parentheses or a capital A. The letter H indicates the
half duplex mode, and the letter F indicates the full
duplex mode.
Type: A - access; T - trunk; H - hybrid Link type options for Ethernet interfaces.
Protocol: (s) - spoofing
If the data link layer protocol state of an interface is
shown as UP, but its link is an on-demand link or not
present, its protocol attribute includes the spoofing
flag (an s in parentheses).
Interface Abbreviated interface name.
Link Physical link state of the interface.
Speed Interface speed, in bps.
display lacp system-id
Use display lacp system-id to display the system ID of the local system.
Syntax
display lacp system-id
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Usage guidelines
You can use the lacp system-priority command to change the LACP priority of the local system. You
specify the LACP priority value in decimal format in the lacp system-priority command, but it is displayed
as a hexadecimal value by the display lacp system-id command.
Examples
# Display the local system ID.
<Sysname> display lacp system-id
Actor System ID: 0x8000, 0000-fc00-6504