R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Command Reference

90
# Display the link-aggregation load sharing criteria of the aggregation group that corresponds to Layer
2 aggregate interface Bridge-Aggregation 10.
<Sysname> display link-aggregation load-sharing mode interface bridge-aggregation 10
Bridge-Aggregation10 Load-Sharing Mode:
Layer 2 traffic: packet type-based sharing
Layer 3 traffic: packet type-based sharing
Table 22 Command output
Field Descri
p
tion
Link-Aggregation Load-Sharing Mode
Global link-aggregation load sharing criteria.
• By default, this field displays the packet type-based
link-aggregation load sharing criteria.
• If you have configured the global link-aggregation load sharing
criteria, this field displays the configured ones.
Bridge-Aggregation10 Load-Sharing
Mode
Link-aggregation load sharing criteria of the aggregation group
that corresponds to the aggregate interface Bridge-Aggregation
10.
• By default, this field displays the global link-aggregation load
sharing criteria.
• If you have configured link-aggregation load sharing criteria
especially for this aggregation group, this field displays the
configured ones.
display link-aggregation member-port
Use display link-aggregation member-port to display detailed link aggregation information for the
specified member ports.
Syntax
display link-aggregation member-port [ interface-list ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface-list: Specifies a list of link aggregation member ports, in the format interface-type
interface-number [ to interface-type interface-number ], where interface-type interface-number specifies
an interface by its type and number.
Usage guidelines
For a member port in a static aggregation group, which is unaware of information about the peer group,
this command displays the port number, port priority, and operational key of the local end only.