R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Configuration Guide

110
The output shows that the device has removed the loops from Ten-GigabitEthernet 1/0/1 and
Ten-GigabitEthernet 1/0/2 according to the shutdown action. Use the display interface command
to display the status of Ten-GigabitEthernet 1/0/1 and Ten-GigabitEthernet 1/0/2 on Device A.
# Display the status of Ten-GigabitEthernet 1/0/1 on Device A.
[DeviceA] display interface ten-gigabitethernet 1/0/1
Ten-GigabitEthernet1/0/1 current state: DOWN (Loop detection down)
...
# Display the status of Ten-GigabitEthernet 1/0/2 on Device A.
[DeviceA] display interface ten-gigabitethernet 1/0/2
Ten-GigabitEthernet1/0/2 current state: DOWN (Loop detection down)
...
The output shows that Ten-GigabitEthernet 1/0/1 and Ten-GigabitEthernet 1/0/2 are already
shut down by the loop detection module.