R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Configuration Guide

157
T
y
p
e Descri
p
tion Remarks
Time to Live
Specifies the life of the transmitted information on the
receiving device.
End of LLDPDU Marks the end of the TLV sequence in the LLDPDU.
Port Description Specifies the port description of the sending port.
Optional.
System Name Specifies the assigned name of the sending device.
System Description Specifies the description of the sending device.
System Capabilities
Identifies the primary functions of the sending device and the
enabled primary functions.
Management Address
Specifies the management address, and the interface number
and object identifier (OID) associated with the address.
2. IEEE 802.1 organizationally specific TLVs
Table 14 IEEE 802.1 organizationally specific TLVs
T
yp
e Descri
p
tion
Port VLAN ID Specifies the port's VLAN identifier (PVID).
Port And Protocol VLAN ID
Indicates whether the device supports protocol VLANs and, if so, what
VLAN IDs these protocols will be associated with.
VLAN Name Specifies the textual name of any VLAN to which the port belongs.
Protocol Identity Indicates protocols supported on the port.
DCBX Data center bridging exchange protocol.
EVB module
Edge Virtual Bridging module, comprising EVB TLV and CDCP TLV. For
more information, see EVB Configuration Guide.
Link Aggregation
Indicates whether the port supports link aggregation, and if yes, whether
link aggregation is enabled.
Management VID Management VLAN ID.
VID Usage Digest VLAN ID usage digest.
ETS Configuration Enhanced Transmission Selection configuration.
ETS Recommendation ETS recommendation.
PFC Priority-based Flow Control.
APP Application protocol.
NOTE:
• HP devices support only receiving protocol identity TLVs and VID usage digest TLVs.
• Layer 3 Ethernet ports support only link aggregation TLVs.
3. IEEE 802.3 organizationally specific TLVs