R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Configuration Guide

163
Step Command Remarks
2. Enter Layer 2 or Layer 3
Ethernet interface view or
Layer 2 aggregate interface
view.
interface interface-type interface-number N/A
3. Enable LLDP polling and set
the polling interval.
• In Layer 2 or Layer 3 Ethernet interface
view:
lldp [ agent { nearest-customer |
nearest-nontpmr } ]
check-change-interval interval
• In Layer 2 aggregate interface view:
lldp agent { nearest-customer |
nearest-nontpmr }
check-change-interval interval
By default, LLDP polling is
disabled.
Configuring the advertisable TLVs
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter Layer 2 or Layer 3
Ethernet interface view or
Layer 2 aggregate interface
view.
interface interface-type interface-number N/A