R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Configuration Guide

26
Disabling global MAC address learning
Step Command Remarks
1. Enter system view.
system-view N/A
2. Disable global MAC address
learning.
undo mac-address mac-learning
enable
By default, global MAC address
learning is enabled.
Disabling global MAC address learning disables the learning function on all interfaces.
The global MAC address learning configuration does not take effect in a TRILL network, in a VPLS VSI, or
for an S-channel in an EVB. For information about the TRILL network, see TRILL Configuration Guide. For
information about VSI, see MPLS Configuration Guide. For information about S-channel and EVB, see
EVB Configuration Guide.
When MAC address learning is disabled, the learned MAC addresses remain valid until they age out.
Disabling MAC address learning on interfaces
With global MAC address learning enabled, you can disable MAC address learning on a single
interface.
To disable MAC address learning on an interface:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter interface view.
• Enter Layer 2 Ethernet interface
view:
interface interface-type
interface-number
• Enter Layer 2 aggregate interface
view:
interface bridge-aggregation
interface-number
• Enter S-channel interface view:
interface s-channel
interface-number.channel-id
• Enter S-channel aggregate
interface view:
interface schannel-aggregation
interface-number:channel-id
N/A
3. Disable MAC address
learning on the interface.
undo mac-address mac-learning
enable
By default, MAC address
learning on the interface is
enabled.
Disabling MAC address learning on a VLAN
With global MAC address learning enabled, you can also disable MAC address learning on a
per-VLAN basis.
To disable MAC address learning on a VLAN: