R211x-HP Flexfabric 11900 Layer 2 - LAN Switching Configuration Guide

30
Figure 5 MAC address tables of devices when Client A roams to AP D
To enable MAC address synchronization:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enable MAC address
synchronization.
mac-address mac-roaming enable
By default, MAC address
synchronization is disabled.
Displaying and maintaining the MAC address table
Execute display commands in any view.
Task Command
Display MAC address table
information.
display mac-address [ mac-address [ vlan vlan-id ] | [ [ dynamic |
static ] [ interface interface-type interface-number ] | blackhole |
multiport ] [ vlan vlan-id ] [ count ] ]
Display the aging timer for dynamic
MAC address entries.
display mac-address aging-time
Display the system or interface MAC
address learning state.
display mac-address mac-learning [ interface interface-type
interface-number ]
Display MAC address statistics. display mac-address statistics