R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

97
undo description
Default
No description is configured for an OSPF process or area.
Views
OSPF view, OSPF area view
Predefined user roles
network-admin
mdc-admin
Parameters
description: Configures a description for the OSPF process in OSPF view, or for the OSPF area in OSPF
area view. The description argument specifies a string of 1 to 80 characters.
Usage guidelines
The description specified by this command is used to identify an OSPF process or area.
Examples
# Describe OSPF process 100 as abc.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] description abc
# Describe OSPF area 0 as bone area.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] area 0
[Sysname-ospf-100-area-0.0.0.0] description bone area
display ospf
Use display ospf to display OSPF process information.
Syntax
In standalone mode:
display ospf [ process-id ] [ verbose ] [ standby slot slot-number ]
In IRF mode:
display ospf [ process-id ] [ verbose ] [ standby chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator