R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

99
Current calculation type: SPF calculation
Current calculation phase: Calculation area topology
Process reset state: N/A
Current reset type: N/A
Next reset type: N/A
Reset prepare message replied: -/-/-/-
Reset process message replied: -/-/-/-
Reset phase of module:
M-N/A, P-N/A, L-N/A, C-N/A, R-N/A
Area: 0.0.0.1 (MPLS TE not enabled)
Authtype: None Area flag: NSSA
7/5 translator state: Disabled
7/5 translate stability timer interval: 0
SPF scheduled count: 5
ExChange/Loading neighbors: 0
Up interfaces: 1
Interface: 192.168.1.2 (Vlan-interface1)
Cost: 1 State: DR Type: Broadcast MTU: 1500
Priority: 1
Designated router: 192.168.1.2
Backup designated router: 192.168.1.1
Timers: Hello 10 , Dead 40 , Poll 40 , Retransmit 5 , Transmit Delay 1
FRR backup: Enabled
Enabled by network configuration
Table 24 Command output
Field Descri
p
tion
OSPF Process 1 with Router ID 192.168.1.2 OSPF process ID and OSPF router ID.
RouterID Router ID.
Router type
Router type:
• ABR.
• ASBR.
• NSSA.
• Null.
Route tag Tag of redistributed routes.
Multi-VPN-Instance is not enabled The OSPF process does not support multi-VPN-instance.
Opaque capable
Opaque LSA advertisement and reception capability is
enabled.
Originating router-LSAs with maximum
metric
The maximum cost value for router LSAs (excluding stub links) is
used.