R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

100
Field Descri
p
tion
Condition
Status of the stub router:
• Always.
• On startup while BGP is converging.
• On startup while BGP is converging for XXX seconds.
• On startup for XXX seconds.
State Indicates whether the stub router is active.
SPF-schedule-interval Interval for SPF calculations.
LSA generation interval LSA generation interval.
LSA arrival interval LSA arrival interval.
Transmit pacing
LSU packet transmit rate of the interface:
• Interval—LSU transmit interval of the interface.
• Count—Maximum number of LSU packets sent each time.
Default ASE Parameter Default ASE Parameters: metric, tag, route type.
Route preference Internal route preference.
ASE route preference External route preference.
SPF computation count SPF computation count of the OSPF process.
RFC1583 compatible Compatible with RFC 1583.
SNMP trap rate limit interval SNMP notification sending interval.
Count Number of sent SNMP notifications.
ExChange/Loading neighbors Neighbors in ExChange/Loading state.
Full neighbors Neighbors in Full state.
Calculation trigger type
Route calculation trigger type:
• Full—Calculation of all routes is triggered.
• Area topology change—Topology change in an area.
• Intra router change—Incremental intra-area route change.
• ASBR change—Incremental ASBR route change.
• 7to5 translator—Type-7-to-Type-5 LSA translator role
change.
• Full IP prefix—Calculation of all IP prefixes is triggered.
• Full intra AS—Calculation of all intra-AS prefixes is
triggered.
• Inc intra AS—Calculation of incremental intra-AS prefixes is
triggered.
• Full inter AS—Calculation of all AS-external prefixes is
triggered.
• Inc inter AS—Calculation of incremental AS-external
prefixes is triggered.
• N/A—Route calculation is not triggered.