R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

103
Field Descri
p
tion
7/5 translator state
State of the translator that translates Type-7 LSAs to Type-5
LSAs. The value can be one of the following:
• Enabled—The translator is specified through commands.
• Elected—The translator is designated through election.
• Disabled—The device is not a translator.
7/5 translate stability timer interval Stability interval for Type-7 LSA-to-Type-5 LSA translation.
ExChange/Loading Neighbors Neighbors in ExChange/Loading state.
Area Area ID in the IP address format.
Authtype
Authentication type of the area:
• None—No authentication.
• Simple—Simple authentication.
• MD5—MD5 authentication.
Area flag
Type of the area:
• Normal.
• Stub.
• StubNoSummary (totally stub area).
• NSSA.
• NSSANoSummary (totally NSSA area).
SPF scheduled Count SPF calculation count in the OSPF area.
Interface Interface in the area.
Cost Interface cost.
State Interface state.
Type Interface network type.
MTU Interface MTU.
Priority Router priority.
Timers
OSPF timers:
• Hello—Interval for sending hello packets.
• Dead—Interval within which the neighbor is down.
• Poll—Interval for sending hello packets.
• Retransmit—Interval for retransmitting LSAs.
FRR backup
Indicates whether Loop Free Alternate (LFA) calculation is
enabled on an interface.
display ospf abr-asbr
Use display ospf abr-asbr to display routes to the ABR or ASBR.
Syntax
display ospf [ process-id ] abr-asbr [ verbose ]
Views
Any view