R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

114
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
process-id: Specifies an OSPF process ID in the range of 1 to 65535. Without this argument, the
command displays the OSPF interface information for all OSPF processes.
interface-type interface-number: Specifies an interface by its type and number.
verbose: Displays detailed OSPF information for all interfaces.
standby slot slot-number: Displays backup OSPF interface information for a card. Without this option, the
command displays OSPF interface information. (In standalone mode.)
standby chassis chassis-number slot slot-number: Displays backup OSPF interface information for a card
on an IRF member device. The chassis-number argument specifies the ID of the IRF member device. The
slot-number argument specifies the slot number of the card. Without this option, the command displays
OSPF interface information. (In IRF mode.)
Usage guidelines
If you do not provide the interface or the verbose keyword, this command displays OSPF brief
information for all interfaces.
Examples
# Display all OSPF interface brief information.
<Sysname> display ospf interface
OSPF Process 1 with Router ID 192.168.1.1
Interfaces
Area: 0.0.0.0
IP Address Type State Cost Pri DR BDR
192.168.1.1 PTP P-2-P 1562 1 0.0.0.0 0.0.0.0
Area: 0.0.0.1
IP Address Type State Cost Pri DR BDR
172.16.0.1 Broadcast DR 1 1 172.16.0.1 0.0.0.0
Table 32 Command output
Field Descri
p
tion
Area Area ID of the interface.
IP address Interface IP address (regardless of whether TE is enabled or not).
Type Interface network type: PTP, PTMP, Broadcast, or NBMA.