R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

121
slot-number argument specifies the slot number of the card. Without this option, the command displays
OSPF neighbor information. (In IRF mode.)
Examples
# Display detailed OSPF neighbor information.
<Sysname> display ospf peer verbose
OSPF Process 1 with Router ID 1.1.1.1
Neighbors
Area 0.0.0.0 interface 1.1.1.1(Vlan-interface1)'s neighbors
Router ID: 1.1.1.2 Address: 1.1.1.2 GR state: Normal
State: Full Mode: Nbr is master Priority: 1
DR: 1.1.1.2 BDR: 1.1.1.1 MTU: 0
Options is 0x02 (-|-|-|-|-|-|E|-)
Dead timer due in 33 sec
Neighbor is up for 02:03:35
Authentication Sequence: [ 0 ]
Neighbor state change count: 6
BFD status: Disabled
Neighbors
Sham link 11.11.11.11 -> 22.22.22.22's neighbor in area 0.0.0.1
Router ID: 22.22.22.22 Address: 22.22.22.22
State: Full Mode: Nbr is master Priority: 1
BFD status: Disabled
Table 37 Command output
Field Descri
p
tion
Area areaID interface
IPAddress(InterfaceName)'s neighbors
Neighbor information of the interface in the specified area:
• areaID—Area to which the neighbor belongs.
• IPAddress—Interface IP address.
• InterfaceName—Interface name.
Router ID Neighbor router ID.
Address Neighbor router address.
GR State
GR state:
• Normal.
• Restarter.
• Complete.
• Helper.