R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

137
standby chassis chassis-number slot slot-number: Displays backup OSPF virtual link information for a
card on an IRF member device. The chassis-number argument specifies the ID of the IRF member device.
The slot-number argument specifies the slot number of the card. Without this option, the command
displays OSPF virtual link information. (In IRF mode.)
Examples
# Display OSPF virtual link information.
<Sysname> display ospf vlink
OSPF Process 1 with Router ID 3.3.3.3
Virtual Links
Virtual-link Neighbor-ID -> 2.2.2.2, Neighbor-State: Full
Interface: 10.1.2.1 (Vlan-interface1)
Cost: 1562 State: P-2-P Type: Virtual
Transit Area: 0.0.0.1
Timers: Hello 10 , Dead 40 , Retransmit 5 , Transmit Delay 1
MD5 authentication enabled.
The last key is 3.
The rollover is in progress, 2 neighbor(s) left.
Table 48 Command output
Field Descri
p
tion
Virtual-link Neighbor-ID ID of the neighbor on the virtual link.
Neighbor-State Neighbor state: Down, Init, 2-Way, ExStart, Exchange, Loading, Full.
Interface IP address and name of the local interface on the virtual link.
Cost Interface route cost.
State Interface state.
Type Virtual link.
Transit Area Transit area ID.
Timers Values of timers: hello, dead, retransmit, and interface transmission delay.
MD5 authentication enabled Authentication mode.
The last key Most recent MD5 authentication key ID.
neighbor(s) Number of neighbors that have not completed key rollover.
display router id
Use display router id to display the global router ID.
Syntax
display router id
Views
Any view