R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

138
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Examples
# Display the global router ID.
<Sysname> display router id
Configured router ID is 1.1.1.1
dscp
Use dscp to configure a DSCP value for outgoing OSPF packets.
Use undo dscp to restore the default.
Syntax
dscp dscp-value
undo dscp
Default
The DSCP value for outgoing OSPF packets is 48.
Views
OSPF view
Predefined user roles
network-admin
mdc-admin
Parameters
dscp-value: Specifies a DSCP value in the range of 0 to 63 for outgoing OSPF packets.
Examples
# Set the DSCP value for outgoing OSPF packets to 63 in OSPF process 1.
<Sysname> system-view
[Sysname] ospf 1
[Sysname-ospf-1] dscp 63
enable link-local-signaling
Use enable link-local-signaling to enable the OSPF link-local signaling (LLS) capability.
Use undo enable link-local-signaling to disable the OSPF LLS capability.
Syntax
enable link-local-signaling
undo enable link-local-signaling