R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

4
NibID: 0x10000003 LastAs: 0
AttrID: 0xffffffff Neighbor: 0.0.0.0
Flags: 0x1008c OrigNextHop: 192.168.47.4
Label: NULL RealNextHop: 192.168.47.4
BkLabel: NULL BkNextHop: N/A
Tunnel ID: Invalid Interface: Vlan-interface1
BkTunnel ID: Invalid BkInterface: N/A
...
Table 2 Command output
Field Descri
p
tion
Destinations Number of destination addresses.
Routes Number of routes.
Destination Destination address/mask length.
Protocol Protocol that installed the route.
SubProtID ID of the subprotocol for routing.
Age Time for which the route has been in the routing table.
Cost Cost of the route.
Preference Preference of the route.
Tag Route tag.
State
Route status:
• Active—Active unicast route.
• Adv—Route that can be advertised.
• Inactive—Inactive route.
• NoAdv—Route that the router must not advertise.
• Vrrp—Routes generated by VRRP.
• Nat—Routes generated by NAT.
• TunE—Tunnel.
OrigTblID Original routing table ID.
OrigVrf Original VPN that the route belongs to.
TableID ID of the routing table.
OrigAs Original AS number.
NibID ID of the next hop.
LastAs Last AS number.
AttrID Attribute ID.
Neighbor Address of the neighbor determined by the routing protocol.
Flags Flags of the route.
OrigNextHop Next hop address of the route.
RealNextHop Real next hop of the route.
BkLabel Backup label.