R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

154
Parameters
maximum: Specifies the maximum number of ECMP routes. No ECMP load balancing is available when
the number is set to 1.
Usage guidelines
The value range for the maximum argument and the default setting depend on the max-ecmp-num
command.
If you set the maximum number of ECMP routes to m by using the max-ecmp-num command, the
maximum argument in the maximum load-balancing command is in the range of 1 to m and defaults to
m.
Examples
# Specify the maximum number of ECMP routes as 2.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] maximum load-balancing 2
Related commands
max-ecmp-num
network (OSPF area view)
Use network to enable OSPF on the interface attached to the specified network in the area.
Use undo network to disable OSPF for the interface attached to the specified network in the area.
Syntax
network ip-address wildcard-mask
undo network ip-address wildcard-mask
Default
OSPF is not enabled for any interface.
Views
OSPF area view
Predefined user roles
network-admin
mdc-admin
View
OSPF area view
Parameters
ip-address: Specifies the IP address of a network.
wildcard-mask: Specifies the wildcard mask of the IP address. For example, the wildcard mask of mask
255.0.0.0 is 0.255.255.255.