R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

7
TableID: 0x2 OrigAs: 0
NibID: 0x10000000 LastAs: 0
AttrID: 0xffffffff Neighbor: 0.0.0.0
Flags: 0x10004 OrigNextHop: 127.0.0.1
Label: NULL RealNextHop: 127.0.0.1
BkLabel: NULL BkNextHop: N/A
Tunnel ID: Invalid Interface: InLoopBack0
BkTunnel ID: Invalid BkInterface: N/A
Destination: 192.168.1.255/32
Protocol: Direct Process ID: 0
SubProtID: 0x0 Age: 04h20m37s
Cost: 0 Preference: 0
Tag: 0 State: Active NoAdv
OrigTblID: 0x0 OrigVrf: default-vrf
TableID: 0x2 OrigAs: 0
NibID: 0x10000003 LastAs: 0
AttrID: 0xffffffff Neighbor: 0.0.0.0
Flags: 0x1008c OrigNextHop: 192.168.1.111
Label: NULL RealNextHop: 192.168.1.111
BkLabel: NULL BkNextHop: N/A
Tunnel ID: Invalid Interface: Vlan-interface1
BkTunnel ID: Invalid BkInterface: N/A
For command output, see Table 2.
display ip routing-table ip-address
Use display ip routing-table ip-address to display information about routes to a specific destination
address.
Use display ip routing-table ip-address1 to ip-address2 to display information about routes to a range of
destination addresses.
Syntax
display ip routing-table [ vpn-instance vpn-instance-name ] ip-address [ mask | mask-length ]
[ longer-match ] [ verbose ]
display ip routing-table [ vpn-instance vpn-instance-name ] ip-address1 to ip-address2 [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator