R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

204
Peer circuit SNPA address: 000c-293b-c4be
Uptime: 00:05:07
Adj protocol: IPv4
Graceful Restart capable
Restarting signal: No
Suppress adjacency advertisement: No
Table 57 Command output
Field Descri
p
tion
System Id System ID of the neighbor.
Interface Interface connecting to the neighbor.
Circuit Id Circuit ID.
State Circuit state.
HoldTime
Within the holdtime, if no hellos are received from the neighbor, the neighbor
is considered down. If a hello is received, the holdtime is reset to the initial
value.
Type
Circuit type:
• L1—Means the circuit type is Level-1 and the neighbor is a Level-1 router.
• L2—Means the circuit type is Level-2 and the neighbor is a Level-2 router.
• L1(L1L2)—Means the circuit type is Level-1 and the neighbor is a Level-1-2
router.
• L2(L1L2)—Means the circuit type is Level-2 and the neighbor is a Level-1-2
router.
PRI DIS priority of the neighbor.
Area Address(es) Area address of the neighbor.
Peer IP Address(es) IP address of the neighbor.
Uptime Time elapsed since the neighbor relationship was formed.
Adj Protocol Adjacency protocol.
Peer local circuit ID Circuit ID of the neighbor.
Peer circuit SNPA address SNPA address of the neighbor.
Graceful Restart capable The neighbor has the GR helper capability.
Restarting signal RR flag.
Suppress adjacency
advertisement
SA flag.
# Display IS-IS neighbor statistics.
<Sysname> display isis peer statistics
Peer Statistics information for ISIS(1)
---------------------------------------
Type IPv4 Up/Init IPv6 Up/Init
LAN Level-1 1/0 0/0
LAN Level-2 1/0 0/0
P2P 0/0 0/0