R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

209
Table 61 Command output
Field Descri
p
tion
Route information for ISIS(1) Route information for IS-IS process 1.
ISIS(1) IPv4 Level-1 Forwarding Table IS-IS IPv4 routing information for Level-1.
ISIS(1) IPv4 Level-2 Forwarding Table IS-IS IPv4 routing information for Level-2.
IPV4 Dest IPv4 destination.
Int. Cost Internal cost.
Ext. Cost External cost.
Admin Tag Tag.
Src Count Count of advertising sources.
Flag
Route state flag:
• R—The route has been installed into the routing table.
• L—The route has been flooded in an LSP.
• U—Route leaking flag. Setting it to UP can prevent an LSP sent
from L2 to L1 from being sent back to L2.
Next Hop Next hop.
Interface Output interface.
ExitIndex Index of the output interface.
display isis spf-tree
Use display isis spf-tree to display IS-IS IPv4 topology information.
Syntax
display isis spf-tree [ ipv4 ] [ [ level-1 | level-2 ] | verbose ] * [ process-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
ipv4: Displays IS-IS IPv4 topology information. Without this keyword, the command displays IS-IS IPv4
topology information.
level-1: Displays Level-1 IS-IS topology information. If no level is specified, the command displays both
Level-1 and Level 2 topology information.
level-2: Displays Level-2 IS-IS topology information. If no level is specified, the command displays both
Level-1 and Level 2 topology information.