R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

238
Examples
# Configure the Level-2 IS-IS cost as 5 for VLAN-interface 10.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] isis cost 5 level-2
Related commands
• auto-cost enable
• bandwidth-reference
isis dis-name
NOTE:
This command does not take effect on a Point-to-Point interface.
Use isis dis-name to configure a name for a DIS to represent the pseudo node on a broadcast network.
Use undo isis dis-name to restore the default.
Syntax
isis dis-name symbolic-name
undo isis dis-name
Default
No name is configured for the DIS.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
symbolic-name: Specifies a DIS name, a case-insensitive string of 1 to 64 characters.
Usage guidelines
This command takes effect only on routers that have dynamic system ID to host name mapping enabled.
Examples
# Configure the DIS name as LOCALAREA.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] isis dis-name LOCALAREA
Related commands
• display isis name-table
• is-name