R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

240
Default
No IS-IS process is enabled on an interface.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
process-id: Specifies an IS-IS process by its ID in the range of 1 to 65535. The default is 1.
Examples
# Enable IS-IS process 1 globally and enable it on VLAN-interface 10.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] network-entity 10.0001.1010.1020.1030.00
[Sysname-isis-1] quit
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] isis enable 1
Related commands
• isis
• network-entity
isis mib-binding
Use isis mib-binding to bind an IS-IS process to MIB operation.
Use undo isis mib-binding to restore the default.
Syntax
isis mib-binding process-id
undo isis mib-binding
Default
MIB operation is bound to the IS-IS process with the smallest process ID.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
process-id: Specifies an IS-IS process by its ID in the range of 1 to 65535.
Usage guidelines
If the specified the process ID does not exist, the MIB binding configuration fails.