R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

241
Deleting an IS-IS process bound to MIB operation deletes the MIB binding configuration. MIB operation
is bound to the IS-IS process with the smallest process ID.
Examples
# Bind MIB operation to IS-IS process 100.
<Sysname> system-view
[Sysname] isis mib-binding 100
isis silent
Use isis silent to disable the interface from sending and receiving IS-IS packets.
Use undo isis silent to restore the default.
Syntax
isis silent
undo isis silent
Default
An interface is not disabled from sending and receiving IS-IS packets.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
The feature is not supported on the loopback interface.
Examples
# Disable VLAN-interface 10 from sending and receiving IS-IS packets.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] isis silent
isis small-hello
NOTE:
This command is not available in loopback interface view.
Use isis small-hello to configure the interface to send small hello packets without CLVs.
Use undo isis small-hello to restore the default.
Syntax
isis small-hello
undo isis small-hello