R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

242
Default
An interface sends standard hello packets.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Examples
# Configure VLAN-interface 10 to send small Hello packets.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] isis small-hello
isis timer csnp
Use isis timer csnp to specify on the DIS of a broadcast network the interval for sending CSNP packets.
Use undo isis timer csnp to remove the configuration.
Syntax
isis timer csnp seconds [ level-1 | level-2 ]
undo isis timer csnp [ level-1 | level-2 ]
Default
The default CSNP interval is 10 seconds.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
seconds: Specifies on the DIS of a broadcast network the interval in seconds for sending CSNP packets.
The value range is 1 to 600.
level-1: Applies the interval to Level-1.
level-2: Applies the interval to Level-2.
Usage guidelines
If no level is specified, the CSNP interval applies to both Level-1 and Level-2.
This command only applies to the DIS of a broadcast network, which sends CSNP packets periodically
for LSDB synchronization.
Examples
# Configure Level-2 CSNP packets to be sent every 15 seconds over VLAN-interface 10.
<Sysname> system-view