R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

Parameters

attribute-id: Specifies a route attribute by its ID in the range of 0 to FFFFFFFF.

Examples

# Display route attribute information in the IPv6 RIB.

<Sysname> display ipv6 rib attribute

Total number of attribute(s): 1

Detailed information of attribute 0x9:

Flag: 0x0

Protocol: BGP4+

Address family: IPv6

Reference count: 0

Local prefrence: 0

Ext-communities number: 0

Ext-communities value: N/A

Communities number: 0

Communities value: N/A

AS-path number: 0

AS-path value: N/A

For command output, see Table 10.

display ipv6 rib graceful-restart

Use display ipv6 rib graceful-restart to display IPv6 RIB GR state information.

Syntax

display ipv6 rib graceful-restart

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Examples

# Display IPv6 RIB GR state information.

<Sysname> display ipv6 rib graceful-restart

RIB GR state : Phase2-calculation end

RCOM GR State : Flush end

Protocol GR state:

No. Protocol Lifetime FD State Start/End

--------------------------------------------------

1 DIRECT6 480 29 End No/No

2 STATIC6 480 32 End No/No