R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

252
maximum load-balancing (IS-IS view)
Use maximum load-balancing to configure the maximum number of ECMP routes for load balancing.
Use undo maximum load-balancing to restore the default.
Syntax
maximum load-balancing number
undo maximum load-balancing
Views
IS-IS view
Predefined user roles
network-admin
mdc-admin
Parameters
number: Specifies the maximum number of ECMP routes.
Usage guidelines
The value range for the number argument and the default setting depend on the max-ecmp-num
command.
If you set the maximum number of ECMP routes to m by using the max-ecmp-num command, the number
argument in the maximum load-balancing command is in the range of 1 to m and defaults to m.
Examples
# Configure the maximum number of ECMP routes as 2.
<Sysname> system-view
[Sysname] isis 100
[Sysname-isis-100] maximum load-balancing 2
Related commands
max-ecmp-num
network-entity
Use network-entity to configure the Network Entity Title (NET) for an IS-IS process.
Use undo network-entity to delete a NET.
Syntax
network-entity net
undo network-entity net
Default
No NET is configured.
Views
IS-IS view