R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

287
group-name: Specifies a BGP IPv4 unicast peer group by its name, a case-sensitive string of 1 to 47
characters. If no group is specified, this command displays brief information about all BGP IPv4 unicast
peer groups.
Usage guidelines
The command with the unicast keyword has the same effect as that without the unicast keyword.
Examples
# Display brief information about all BGP IPv4 unicast peer groups for the public network.
BGP peer group: group1
Remote AS: 600
Type: external
Members:
1.1.1.10
BGP peer group: group2
Remote AS number: not specified
Type: external
Members:
2.2.2.2
# Display detailed information about BGP IPv4 unicast peer group group1 for the public network.
<Sysname> display bgp group ipv4 group1
BGP peer group: group1
Remote AS: 600
Type: external
Maximum number of prefixes allowed: 4294967295
Threshold: 75%
Configured hold time: 180 seconds
Keepalive time: 60 seconds
Minimum time between advertisements: 30 seconds
Peer preferred value: 0
Routing policy configured:
No routing policy is configured
Members:
Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
1.1.1.10 600 0 0 0 0 00:00:55 Established
Table 69 Command output
Field Description
BGP peer group Name of the BGP peer group.
Remote AS AS number of the peer group.
Type
Type of the peer groups:
• external—IBGP peer group.
• internal—EBGP peer group.