R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

288
Field Description
Maximum number of prefixes
allowed
Maximum number of routes allowed to learn from the peer.
Threshold
Percentage of received routes from the peer to maximum routes allowed
to learn from the peer. If the percentage is reached, the system
generates alarm messages.
Configured hold time Configured Hold Interval in seconds.
Keepalive time Keepalive interval in seconds.
Minimum time between
advertisements
Minimum route advertisement interval in seconds.
Peer preferred value Preferred value specified for routes from the peer.
Routing policy configured
Routing policy configured for the peer group.
If no routing policy is specified, this field displays No routing policy is
configured.
Members Information about peers included in the peer group.
Peer IP address of the peer.
AS AS number of the peer.
MsgRcvd Number of messages received.
MsgSent Number of messages sent.
OutQ Number of messages to be sent.
PrefRcv Number of prefixes received.
Up/Down Lasting time of the current BGP session state.
State Current state of the BGP session between the local router and the peer.
display bgp group ipv6 unicast
Use display bgp group ipv6 unicast to display BGP IPv6 unicast peer group information.
Syntax
display bgp group ipv6 [ unicast ] [ vpn-instance vpn-instance-name ] [ group-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator